Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

MULTICYLINDER ENGINES 135 Valve head margin seat width (Int. and exh.) Valve depth-max. Valve stem clearance Intake Exhaust Max. stem clearance Valve stem diameter Valve stem wear limit Valve stem runout-max. Valve guide diameter Valve guide wear limit Valve guide protrusion Valve spring Standard free length Min. free length Installed height Pressure at Installed height Rocker arm shaft clearance Rocker arm shaft clearance-max. Rocker arm bore wear limit Rooker arm shaft wear limit 011 pump Inner rotor tlp-to-outer rotor tip Max. Outer rotor-ta-pump body Max. Rotor side clearance Max. Shaft clearance Max.

Table 2 ENGINE SPECIFICATIONS (3GM AND 3GM30) (continued) 0.75-1.15 mm (0.030-0.045 In.) 1.77 mm (0.070 In.) 1.25 mm (0.049 In.) 0.040-0.065 mm (0.0016-0.0026 In.) 0.045-0.070 mm (0.0018-0.0028 ln.) 0.15 mm (0.006 in.) 7.000 mm (0.2756 In.) 6.900 mm (0.2717 In.) 0.03 mm (0.0012 In.) 7.000 mm (0.2756 in.) 7.080 mm (0.2878 In.) 7.0 mm (0.276 In.) 38.5 mm (1.52 In.) 37 mm (1.46 In.) 29.2 mm (1.15 In.) 16.16 kg at 29.2 mm (35.63 lb.

at 1.15 In.) 0.016-0.052 mm (0.0006-0.0020 In.) 0.15 mm (0.006 In.) 14.10 mm (0.555 In.) 13.90 mm (0.547 in.) 0.050-0.105 mm (0.0020-0.0041 In.) 0.15 mm (0.006 In.) 0.050-0.105 mm (0.0020-0.0041 In.) 0.15 mm (0.006 In.) 0.030-0.080 mm 0.13 mm (0.005 in.) 0.015-0.050 mm (0.0006-0.0020 In.) 0.20 mm (0.0079 In.) Bore 3HM 3HM35 Stroke Displacement 3HM 3HM35 Number of cylinders Firing order Cylinder bore diameter (3HM35) Cylinder liner diameter (3HM) Max. Cylinder liner protrusion (3HM) Borelliner out-of-round-max. Cylinder block warpage-max.

Piston diameter 3HM Standard Wear limit 3HM35 Standard Wear limit Piston top clearance Piston ring side clearance Top ring Second ring Table 3 ENGINE SPECIFICATIONS (3HM AND 3HM35) 75 mm (2.95 In.) 80 mm (3.15 In.) 85 mm (3.35 In.) 1126 cc (68.7 cu. In.) 1282 cc (78.2 cu. In.) 3 1-2-3 80.000-80.030 mm (3.1496-3.1508 In.) 75.00 mm (2.9528 In.) 75.10 mm (2.9567 In.) 0.005-0.075 mm (0.0002-0.0030 In.) 0.02 mm (0.0008 In.) 0.05 mm (0.002 In.) 74.907-74.937 mm (2.9491-2.9503 In.) 74.850 mm max. (2.9468 In.) 79.902-79.932 mm (3.1457-3.1470 In.) 79.840 mm max. (3.1433 In.) 0.66-0.86 mm (0.026-0.034 In.) 0.065-0.100 mm (0.0026-0.0039 In.) 0.035-0.070 mm (0.0014-0.0028 In.) (continued)