154 CHAPTER SEVEN GOVERNOR SYSTEM Locking screw Fuel injection limiter Fuel control rack Engine stop lever -----:....."."=-,,"'" Governor lever shaft Engine stop spring Cam Governor level 1 Governor weight Adjustments Yanmar recommends that only idle speed adjustment should be performed by non-authorized service techni- cians. Refer to Chapter Three for the idle speed procedure. Other adjustments, such as no-load maximum governed speed and fuel limiter screw setting, are set by the manufacturer. Incorrect adjustment can damage the en- gine. To prevent tampering, a safety wire is attached to each screw and a lead seal is affixed to the wire or the screw assembly is marked (Figure 46).
Removing or cut- ting the wire or seal or altering the marked screw position will void the engine warranty.