heidenhain PWT 100, PWT 101 — 1.2 Information on the product

1 Fundamentals | Information on the product The ID label is provided on the back of the product. Example: 1 2 3 1 Product designation 2 ID number 3 Index Connection technology In order to ensure a reliable and correct transmission of the data from the encoder to the product, the connecting cables for the Mitsubishi, Panasonic and Yaskawa interfaces must be designed such that "two-pair transmission" is possible. If this is not the case, any adapter cables or extension cables being used must be disconnected. A suitable adapter cable must then be used for the connection to the encoder.

For more information, please refer to the Product Information or the Mounting Instructions for the encoder, or the "Interfaces of HEIDENHAIN Encoders" brochure. Before using the documentation and the product, you need to verify that the documentation matches the product.

Compare the ID number and the index indicated in the documentation with the corresponding data given on the ID label of the product Compare the firmware version given in the documentation with the firmware version of the product If the ID numbers and indexes as well as the firmware versions match, the documentation is valid If the ID numbers and indexes do not match, so that the documentation is not valid, you will find the current documentation for the product at www.heidenhain.com . HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2021 11 PWT 100 xxx SN 12 345 678 x ID 1234567-xx