Kaiyi HR25/30T-9 — 제목없음

When the device is not in use, the cutting arm is moved to the top (i.e. rest) position. Thus, damage to the device and the asphalt is prevented. Pump unit NOTE! Please note that cutting or (com)pressing asphalt is possible only as long as the asphalt layer is warm! i The edge cutting and pad roller has been speci fi cally designed for straightening pedwalks and cycle paths; it has proven to be the ideal tool for this type of work. In addition, the device is highly suitable for pressing and compressing farm tracks and cycle paths.

The contact pressure of the device is generated by a hydraulic cylinder ( 1 ), whose lifting motion causes the cutting arm with the tool to be pressed onto the surface. Edge cutting and pad roller 4 - 3 Issue: 01-10 The device is activated by means of a toggle switch on the control panel. 3 Pressure control valves 1 Hydraulic cylinder 4 Hydraulic oil fi lter 2 Hydraulic pump Description: 4 Hydraulic oil tank Edge cutting and pad roller: Hydraulic system 3 1 2 Hydraulic cylinder Hydraulic cylinder