The oil fl ow in the control block is controlled by the steering motions of the steering wheel, which causes the hydraulic cylinder at the articulated pendulum joint to extend or retract. Steering and articulated pendulum joint 10 - 2 Issue: 01-10 CAUTION! The articulated pendulum joint and the steering system constitute a unit. If the front drum is bent, this enables you to turn corners and take curves. The hydraulic steering system is powered by a hydraulic pump at the Diesel engine. The steering motion/angle determines the turning radius (maximum radius: +/- 30°). The steering orbitrol (control block) can be found under the steering column.
Measurement / setting Default value Operating pressure steering system 180 bar Steering of the tandem roller is effected by a hydraulic cylinder. 10.1 Steering system and articulated pendulum joint 10.1.2 Technical speci fi cations 10.1.1 Steering system Measurement / setting Default value Operating pressure steering system 180 bar