Kaiyi HR25/30T-9 — 제목없음

CAUTION! Any repair work related to the articulated pendulum joint may exclusively be carried out by the manufacturer with the appropriate tools! Always replace the entire articulated pendulum joint. Put the new articulated pendulum joint ( 3 ) onto the carrying board of the elevating truck and position By means of the elevating truck, lower the detached articulated pendulum joint ( 3 ) to the ground. Re-establish the connection ( 3.1 ) between the articulated pendulum joint ( 3 ) and the front end ( 1 ). Steering and articulated pendulum joint 10 -7 Issue: 01-10 it under the tandem roller.

Lift the articulated pendulum joint so you can screw on the bolts ( 3.2 ) between the articulated pendulum joint ( 3 ) and the rear end ( 2 ). Tighten all bolts crosswise, in accordance with the table of tightening torques (see Chapter 1 ). Unscrew the bolts ( 3.1 ) connecting the front end with the articulated pendulum joint ( 1/3 ). Uscrew the bolts ( 3.2 ) connecting the rear end with the articulated pendulum joint ( 2/3 ). 3 Use an elevating truck to place a carrying board under the articulated pendulum joint. Lift the board until it is right below the articulated pendulum joint.

Replacing and installing the articulated pendulum joint 3.2 Dismantling the articulated pendulum joint 3 2 3.1 2 3 1 3