Safety Park and Prepare for Service Safely Warn others of service work. Always park and prepare your machine for service or repair properly. Park machine on a level surface and lower blade and attachments to the ground. Place park lock lever in “up” (locked) position and stop engine. Attach a Not Operate” tag in an obvious place in the operator's station. T133332 —19—17APR13 Securely support machine or attachment before working under it. Do not support machine with blade or attachments. Do not support machine with cinder blocks or wooden pieces that may crumble or crush. Do not support machine with a single jack or other devices that may slip out of place.
Understand service procedures before beginning repairs. Keep service area clean and dry. Use two people whenever the engine must be running for service work. TS229 —UN—23AUG88 MB60223,0000098 -19-29SEP08-1/1 Service Cooling System Safely Explosive release of fluids from pressurized cooling system can cause serious burns. Do not service radiator through the radiator cap. Only fill through the surge tank filler cap. Shut off engine. Only remove surge tank filler cap when cool enough to touch with bare hands. Slowly loosen cap to relieve pressure before removing completely.
TS281 —UN—15APR13 TX,SURGE -19-19JAN11-1/1 Remove Paint Before Welding or Heating Hazardous fumes can be generated when paint is heated by welding or using a torch. Dust from sanding or grinding paint can also be hazardous. T133546 —UN—24AUG00 Remove paint to at least 76 mm (3 in.) from area to be heated. Wear an approved respirator when sanding or grinding paint. If a solvent or paint stripper is used, wash area with soap and water. Remove solvent or paint stripper containers from work area, and allow fumes to disperse at least 15 minutes before welding or heating. Work outside or in a well-ventilated area. Dispose of waste, paint, and solvents properly.
TX03679,0001732 -19-29AUG07-1/1 TM10779 (03MAY19) 9000-01-10 850JR MCT Crawler Dozer 050319 PN=16