OM2021 12/01 Safety - Section 2 General Safety Page 2-13 Spilled fuel and oil may cause slipping. Always clean up spills immediately. RULES TO FOLLOW WHEN ADDING FUEL OR OIL Always tighten the cap of the fuel and oil fillers securely. Never use fuel for washing any parts. Always add fuel and oil in a well-ventilated place. RADIATOR WATER LEVEL If it is necessary to add water to the radiator, stop the engine and allow the engine and radiator to cool down before adding the water. Slowly loosen the cap to relieve pressure before removing the cap. USE OF LIGHTING When checking fuel, oil, coolant, or battery electrolyte, always use lighting with anti-explosion specifications.
If such lighting equipment is not used, there is danger or explosion. PRECAUTIONS WITH BATTERY When repairing the electrical system or when carrying out electrical welding, remove the negative (-) terminal of the battery to stop the flow of current. HANDLING HIGH-PRESSURE HOSES Do not bend high-pressure hoses or hit them with hard objects. Do not use any bent or cracked piping, tubes or hoses. They may burst during use. Always repair any loose or broken fuel hoses or oil hoses. If fuel or oil leaks, it may cause a fire.