BAIC — Recycling

Second Life and Recycling of Lithium-Ion Batteries 175 and manganese are expelled in the slag which, while still expensive and energy intensive, can continue to be refined ( Figure 2 ). Some of these materials can be refined for use in future batteries, however much of it is no longer of high enough quality for using in battery applica- tions but can still find uses in many other applications. In low temperature recycling, cells are essentially frozen using a cryogenic process and then shredded. From this point the materials can be separated using a series of filters, shakers, and other separating technologies.

Compared to the high temperature processing, this technique is much less energy intensive. However, the quality of the materials must, again, be evaluated to determine if they can be reused in future battery applications, or if their quality is not high enough they may be used in other products or simply recycled. And of course the third method for recovering materials from spent batteries is the physical separation process. This usually requires that the inputs be separated and a single type of battery chemistry (LFP, LCO, LMO, NMC, etc.) be introduced into the process.

This may be done by hand and can be done at very low volumes but could enable electrolyte, anode material and potentially even cathode material to reenter the battery value chain while the remaining materials are recycled. One challenge of battery recycling is the importance of being able to differentiate the chemis- tries and the materials. There have been numerous reports of lithium-ion batteries that have been developed in lead acid form factors being introduced into the lead acid recycling pro- cess. This does not end well and generally ends with some form of combustion as the two types of products are mixed.

This is why it is important even at this early stage of the industry to begin developing standards for labeling lithium-ion batteries. The Society of Automotive Engineers has begun working on standards for labeling of lithium-ion batteries as well as for recycling them. As the number of these products that are entering the recycling process increases this will continue to gain importance in order to ensure the safety and security of the recycling industry and those people involved with the handling of these products.

ĂƩĞƌLJĐŽůůĞĐƟŽŶ ƵƌŶŝŶŐŇĂŵŵĂďůĞ ĞůĞĐƚƌŽůLJƚĞƐ EĞƵƚƌĂůŝnjĂƟŽŶŽĨ ŝŶƚĞƌŶĂůĐŚĞŵŝƐƚƌLJ ŝƐƉŽƐĂůŽĨŶŽŶͲ ƌĞĐŽǀĞƌĂďůĞǁĂƐƚĞ ;ůŝƚŚŝƵŵΘ ĂůƵŵŝŶƵŵͿ ZĞĮŶŝŶŐĂŶĚ ƉƵƌŝĮĐĂƟŽŶŽĨŚŝŐŚ ǀĂůƵĞŵĞƚĂůƐ ^ŵĞůƟŶŐŵĞƩĂůŝĐ ĐŽŵƉŽŶĞŶƚƐ Figure 2 Lithium-ion battery recycling process.