Lithium-Ion Battery Applications 183 Automotive Applications Electric batteries for automotive applications will fall into four basic categories: (1) micro hybrids (uHEVs), (2) hybrid electric vehicles (HEVs), (3) plug-in hybrid electric vehicles (PHEVs), and (4) battery electric vehicles which may also come in the form of an extended-range electric vehicle (EREV) or even fuel cell EV. Each of these categories was briefly covered in Chapter 3, however, in this chapter will discuss some specific examples. Microhybrid Electric Vehicles The uHEV is a category that has grown significantly over recent years due to continually increasingly demanding CO 2 reduction and fuel economy standards.
In Europe, this form of electrification has already made significant penetration into the market with more than 50% of the new vehicle sales having some form of uHEV technology. There are basically two types of uHEV, a 12-V system and a 48-V system. Most of the 12-V systems tend to use lead acid batteries but are beginning to shift toward lithium-ion battery solution for some applications. Most of these applications are designed with about 250 Wh of energy. These applications do not provide any other support functionality to the vehicle except for the stop/start functionality ( Figure 7 ). In order to get more electric functionality, system designers are moving toward 48-V-type applications.
These batteries may have between 500 Wh and 1 kWh of energy. The biggest difference between the two is that the 48-V system will typically include the capability to capture regenerative braking as well as providing some mini- mal acceleration support, powering the A/C compressor and the auxiliary systems power. Many forecasts expect to see global market penetration of around 20% by the year 2020, other forecasts show penetration in Europe and the United States even achieving upward of 70–80% uHEV penetration by 2020.
There is not yet a set of standards for batteries of this type, rather they are being designed either specific to the vehicle or are being designed to fit into the footprint of a standard lead acid battery. One example is from Johnson Controls who have developed an “off-the-shelf” standard 48-V-battery system designed for use in stop/start applica- tions. Johnson Controls has not yet published a data sheet for this yet, but based on their cell technology we can estimate that it likely has 13 cells in series and a single parallel grouping.
And assuming it is using either their PL6P or PL27P means that it will have either 288 Wh (48.1 V Ч 6 Ah) or 1.3 kWh (48.1 V Ч 27 Ah) of energy on board ( Figure 7 ). Another example of a manufacturer who has adopted stop/start technology is Mercedes who offers a 12-V-stop/start technology using a lead acid battery on most of its vehicle line in Europe today, including the B-Class, C-Class, CLA, CLS, E-Class, G-Class, GL-Class, GLA, GLK, M-Class, S-Class, SLA, SLK, and the SLS AMG.