daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 140 Printed in Jan. 2001 PS-MMA0415-E1A Group Part Inspection Item Stand value for assembly Limit For use Correction Remark Cooling system Radiator Radiator & water pump for corrosion, damage & improper connecting - - Correct or replace Test for leakage (air pressure) (kg/cm2 ) 1.0 - Submerge in water and replace if air bubbles found Pressure valve for opening pressure (kg/cm2 ) 0.5 - Negative pressure valve for opening pressure (mmHg ) 20 - Water pump Delivery volume l/min - Engine speed 2,700rpm - Water temp. 80°C - Pressure :

0.8 kg/cm2 280 - Check the water passage For any restrictions Clearance between impeller & housing 0.35 - Replace if impeller & housing are damaged Perpendicularity of pulley 0.3 Adjust by a bench press Fan belt depression(with thumb) mm Approx. 15 - Adjust Cooling water temp Operating temperature (permissible temp.) °C 79~95 - Must not exceed this value Permissible temperature in a short time °C - 105 Thermostat Thermostat opening temp. °C (under atmospheric pressure) 79 - Replace Type –II - Opening temp. : 83°C - Full opening temp.: 95°C Full opening temp. °C 94 - Replace if defective Stroke : min.

8mm Fuel system Piping & others Fuel pipe, injection pipe & nozzle holder for damage, cracks, improper packing, etc. - - Repair or replace Fuel filter cartridge for damage or dimple - - Replace cartridge Injection pressure of injection nozzle (kg/cm2) D1146 : 210 D1146TI : 214 DE08TIS: 1st 160 2nd 220 - Adjust by shim Operating pressure of overflow valve (kg/cm2) 1.0~1.5 - Replace valve Projection height of nozzle from the cyl.

head surface(mm) 2.53 - Replace seal ring Inspection at completion Running-in the engine - - Refer to supplement “running-in” Cylinder pressure Compression pressure of cylinder (kg/cm2) 24 ~ 28 24 or more Correct at 200rpm or more (20°C) Compression pressure difference of each cylinder ±10% or less against average Correct