D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 3.1.30. Oil pump z Unscrew the bracket fixing bolts of the oil suction pipe. z Unscrew the pipe fixing bolts of oil pump and disassemble the suction and supply oil pipe. z Unscrew the oil pump fixing bolts, and disassemble the oil pump. 3.1.31. Piston and connecting rod z Remove the connecting rod cap bolts in the reverse order of assembling but do same as the cylinder head bolt removal. z Disassemble the upper/lower of connecting rod caps by tapping lightly with urethane hammer, and remove the bearing.
z By pushing the connecting rod with wooden bar from the direction of oil pan toward cylinder head, disassemble the z The disassembled piston assembly piston assembly. should be handled to prevent bumping each other, and stored as the cylinder's order. z In order for connecting rod cap not to be swapped, temporarily assemble to the corresponding connecting rod. (1) Remove the snap rings by means of a plier. 42 Printed in Jan. 2001 PS-MMA0415-E1A