D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 1.3. Engine Specifications 1.3.1. Specification 4 Printed in Jan. 2001 PS-MMA0415-E1A Engine Model Items D1146 D1146TI DE08TIS Engine type 4 cycle in-line, Water-cooled type Naturally aspirated 4 cycle in-line, Water-cooled type Turbo charged & intercooled Combustion chamber type Direct injection type Cylinder liner type Replaceable dry liner Timing gear system Gear driven type No. of piston ring Compression ring 2, oil ring 1 No. of cylinder-bore x stroke (mm) 6 – 111 × 139 Total piston displacement (cc) 8,071 Compression ratio 17.5 : 1 16.8 : 1 18.5 :
1 Engine dimension (length x width x height) (mm) 1,253x811.5x934.5 1,253x812.5x1,009 1,253x812.5x1,009 Engine weight (kg) 730 745 745 Rotating direction (viewed from flywheel) Counter clockwise Fuel injection order 1 – 5 – 3 – 6 – 2 – 4 Fuel injection timing (B.T.D.C static) 15° 9° 3° Injection pump type Zexel in-line “AD” type Zexel in-line “P” type Governor type Mechanical governor type(RLD) Mechanical governor type(RLD-J) Injection nozzle type Multi-hole type (5 hole) Multi-hole type (7 hole) Fuel injection pressure (kg/cm2) 210 214 160/220 Compression pressure (kg/cm2) 28 (at 200 rpm) Intake and exhaust valve clearance (at cold) (mm) 0.3 Intake valve Open at 16° (B.T.D.C) Close at 36° (A.B.D.C) Exhaust valve Open at 46° (B.B.D.C) Close at 14° (A.T.D.C) Lubrication method Full forced pressure feed type Oil pump type Gear type driven by crankshaft Oil filter type Paper element type Cartridge type Lubricating oil capacity (max./min.) (lit) 15.5/12 or 20/17 Oil cooler type Water cooled Water pump Centrifugal type driven by belt Cooling Method Fresh water forced circulation Cooling water capacity (engine only) (lit) 14 Thermostat type Wax pallet type (79 ∼ 94 °C or 83 ∼ 95 °C ) Air compressor type & capacity (cc) Belt driven type, 220 or 300 Alternator voltage – capacity (V – A) 24 – 45 or 24-150 Starting Motor voltage – output (V - kW) 24 – 4.5 Air heater capacity (V – A) 22 – 95 (2.1kW) Battery capacity (V - AH) 24 - 150