CHECKS BEFORE START 20 B Cab Light Switch To turn on the cab light, set the starter switch to the "RUN" position and then the cab light switch to the "ON" position, respectively. B Opening/Closing of CAB Door 1. Unlock the CAB door and pull the knob. Open the CAB door fully until fixed into place. 2. To close the CAB door, push the release lever down and close the door. (1) Cab light switch (1) Door knob (outside) B Heater Switch Turn the starter switch to the "RUN" position and turn the heater switch clockwise, the heater fan will be activated and the cabin will start to warm up. The heater has three position. (1) Release lever (2) Door knob (inside) 3.
When leaving the excavator, always lock the door. (1) Heater switch (2) Temperature control dial A During summer, turn the heater valve clockwise to close the valve.