Kubota — Starting the Engine

24 OPERATION OF THE ENGINE OPERATION OF THE ENGINE Start the engine in the following manner: 1. Before starting the engine, make sure that all control levers are in the neutral positions. To avoid personal injury: A Read "SAFE OPERATION" at the beginning of this operator's manual. A Obey the danger, warning and caution labels on the excavator. A To avoid the danger of exhaust fume poisoning, do not operate the machine in a closed building without proper ventilation. A Always start the engine from the operator's seat. Do not start the engine while standing next to the excavator. Before starting the engine, sound the horn to get the attention of persons standing nearby.

(1) Attachment control lever (left) (2) Drive lever (left) (3) Drive lever (right) (4) Attachment control lever (right) (5) Throttle potentiometer 2. Pull the lock lever all the way back. (lock position) 3. Put the throttle potentiometer in the middle between " " and " " symbols. The switch for Auto Idle control is in the OFF position. (See "AUTO IDLE (AI) OPERATION" in the Excavator operation.) (1) Horn switch A Do not use starting fluid or ether. A In order not to overload the battery and starter, avoid engaging the starter for more than 10 sec. A If the engine does not start in 10 sec., please wait 20 sec. or more, before attempting to restart.

STARTING THE ENGINE To avoid personal injury: A The operator should not depend solely on the warning lamps, but should always conduct the routine checks (see "MAINTENANCE"). (1) Throttle potentiometer (2) Switch for Auto Idle control