Kubota — Towing the Machine

49 TRANSPORTING THE EXCAVATOR ON A VEHICLE 3. For additional safety, use blocks or supports under the ramps and the bed. (1) Chain (2) Block 4. Completely align the ramps and the tracks and then drive the excavator slowly up the ramps. After ensuring that the tracks are completely on the bed, swing the upper body around to the back of the vehicle. 5. Lower the dozer onto the bed. 6. Pull in the bucket and arm completely. Then lower the boom. 7. Stop the engine, release pressure trapped in the hydraulic system and remove the key. 8. Raise the lock lever. 9. Block the tracks with blocks and tie down the excavator. B Towing the machine To avoid personal injury:

A When towing the excavator or pulling a load must be less than the strength of the towing line attached to excavator. Not to be used for tiedown or lifting the machine. A Towing is only allowed over a short distance and at walking speed. 1. Attach the tow bar or towing rope to the hook on the excavator and to the pulling vehicle. The tow bar should be mounted at a right angle to the vehicles. 2. The operator must be seated during the recovery procedure. 3. Drive slowly with the tractive vehicle to avoid abrupt loads. (A) Tie down point (1) Tow line