Kubota — Lifting Procedure for the Excavator

51 LIFTING OF THE EXCAVATOR 2. Attaching the steel cables or straps. (1) Always hook the excavator at three points. (one on the boom and left and right of the dozer) (2) Always use a shackle on each lifting hole when attaching the cables or straps. (3) Keep the angle between the front and rear cables or straps within 51 . (3) Lift the excavator horizontally. (Modify cable or strap connections according to needs) Maximum strength for example: (JIS G3525: 2006 or ISO 4344: 2004) - "6X24" 5. Lifting (1) Lift slowly and safely (2) Do not enter the excavator area when lifting. (3) Lift the excavator horizontally.

(Modify cable or strap connections according to needs) Maximum strength for example : (JIS G 35 25) - "6 x24" (1) Cable or strap (A) 55 or less A While lifting, carefully keep the machine well balanced with its center of gravity in mind. A Do not lift the machine with the boom swinging or the upper structure swiveling. 3. Tackle The weights of the excavators and the recommended tackle for lifting these loads are mentioned in the following table. Choose components having enough strength. 6. Lifting (1) Lift slowly and safely (2) Do not enter the excavator area when lifting. (3) Lift the excavator horizontally.

(Modify cable or strap connections according to needs) Maximum strength for example : (JIS G 35 25) - "6 x24" *Excavator Weight: With CAB, steel tracks. Steel wire: 6X24 4. Lifting (1) Lift slowly and safely (2) Do not enter the excavator area when lifting.

Diameter zinc-plated not zinc-plated 14 mm (9/16) 89.7 kN (9146 kgf) 96.6 kN (9850 kgf) 16 mm (5/8) 117 kN (11930 kgf) 126 kN (12848 kgf) 18 mm (45/64) 148 kN (15091 kgf) 160 kN (16315 kgf) 20 mm (3/4) 183 kN (18660 kgf) 197 kN (20088 kgf) 22.4 mm (-) 230 kN (23453 kgf) 247 kN (25187 kgf) Diameter zinc-plated not zinc-plated 10 mm (3/8) 45.8 KN (10296 lbs) 49.3 KN (11083 lbs) 12.5 mm (1/2) 71.5 KN (16074 lbs) 77 KN (17310 lbs) 14 mm (9/16) 89.7 KN (20165 lbs) 96.6 KN (21717 lbs) 16 mm (5/8) 117 KN (26303 lbs) 126 KN (28326 lbs) 18 mm (45/64) 148 KN (33272 lbs) 160 KN (35969 lbs) Excavator Weight* CAB CANOPY 4875 kg 4785 kg Load / Cable 1550 kN (158056 kgf) Minimum Wire Diameter (Safety factor=6) 16 mm or more Diameter zinc-plated not zinc-plated 10 mm (3/8) 45.8 KN 49.3 KN 12.5 mm (1/2) 71.5 KN 77 KN 14 mm (9/16) 89.7 KN 96.6 KN 16 mm (5/8) 117 KN 126 KN 18 mm (45/64) 148 KN 160 KN