67 REGULAR CHECKS AND MAINTENANCE WORK B Checking Radiator Hoses and Clamps B Inspection and Cleaning Air Filter Element Open the engine hood and remove the dust-cover. Take out only outer element, clean the element, case interior and reassemble. During reassembly, take care to install the dust-cover so that its TOP mark (arrow) faces up- wards. Do not remove the inner element. To avoid personal injury: A Wait long enough for the radiator coolant to cool down. Check the coolant hoses for proper connection. This check should be carried out every 200 hours or every 6 months, whichever comes first. 1. Should the hose clamps become loose or coolant leaks, tighten the hose clamps properly. 2.
Should the radiator hoses become swollen, aged or cracked, they must be replaced and the hose clamps tightened again properly. A Should the machine be used in extremely dusty areas, the air filter element must be inspected and cleaned more frequently than in the specified maintenance periods. A The air filter has a dry element, keep free from oil. A Do not run the engine without the air filter. (1) Inner element (2) Outer element (3) Dust-cover (4) Clamps (1) Radiator hoses (2) Hose clamps