Kubota — Checking Air-Conditioner Pipes and Hoses

75 REGULAR CHECKS AND MAINTENANCE WORK EVERY 1000 SERVICE HOURS OR ONCE A YEAR ANNUAL SERVICING B Electrical Wiring and Fuses Check the terminals periodically for proper connections. Loose wiring or damaged cables can cause improper functioning or short circuiting of the electrical system. Check wiring and replace damaged components immediately. If a fuse blows out soon after having been replaced, contact your nearest KUBOTA dealer. Never use a fuse other than specified. B Replacing Air Filter Element Open the engine hood and remove the dust-cover. Remove and replace the outer element and inner element with new elements.

When reassembling, install the dust-cover so that its TOP mark (arrow) faces up-wards. B Checking the Electrical Circuit Check the electrical circuitry for disconnections, shorts or loose terminals. B Checking Air-Conditioner Pipes and Hoses To avoid personal injury: A Do not touch the coolant hoses or the heater with your hand. You may get burned. (1) Inner element (2) Outer element (3) Dust-cover (4) Clamps 1. Check to see that all lines and hose clamps are tight and not damaged. 2. If hoses and clamps are found worn or damaged, replace or repair them at once.

(Consult your local KUBOTA Dealer for this service.) A Shorten the replacement period if the machine is used in dusty or sandy areas. EVERY 1500 SERVICE HOURS B Checking Fuel Injection Nozzle(Injection Pressure) Consult your local KUBOTA Dealer for this service. EVERY 2000 SERVICE HOURS Do all 50, 100, 200, 250, 500 and 1000 hour servicing at the same time. B Changing Front Idler and Track Roller Oil A Contact your KUBOTA dealer for details. B Checking the Alternator and Starter Motor A Contact your KUBOTA dealer for details. EVERY 3000 SERVICE HOURS B Checking Injection Pump Consult your local KUBOTA Dealer for this service.