. OPERATION EXPLANATION OF COMPONENTS REMARK 3 - 59 LISTENING TO RA 1. Turn the starti ng switch ON, then turn power 2. Use band sele ctor button (2) to select MW (A M), FM1 or FM2. 3. Select the sta tion with the preset buttons (3). If you do not know what station has been record ed for any preset button, press aut seconds. The pre o store/preset scan button (4) f set stations are broadcast from or less than 0.5 No. 1 to No. 6 for 5 seconds each. When the desired station is received, press auto s tore/preset scan button (4) again t 4. If you want to tune in to a station that is not p reset, use either seek tuning b utton (5) or manual tuning butto 5.
Adjust the vol ume, balance, and tone as desi 6. When turning until it clicks. REMARK To switch to th e radio when listening to a cass ette, press the cassette eject button to stop If you insert a cassette when listening to the r adio, the tape wil l start to play. LISTENING TO CA SSETTE TAPE ng switch ON, then turn power switch (1) ON. 1. Turn the starti 2. Set the casse right side and automatically If the arrow in right, the top s left, the botto When the tap and the other 3. When finished eject the tape 1. Turn the starti ng switch ON, then turn power 2. Set the casse tte with the exposed portion of m side is being played. e reaches the end, it is autom side starts to play.
atically reversed 3. When finished with the tape, press the casset te eject button to and automatically switch to the radio.