. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING of fuel or damage to the hoses and tubes. If any problem is found, carry out 3 - 64 WALK-AROUND CHECK ound and under the machine for the loose bolts nuts, and leakage of oil, fuel, Before starting the engine, check ar loose bolts nuts, a nd leakage of oil, fuel, o r coolant. Check also the condition of the work equipment and hydraulic line. Check that there is no looseness or play in the electric wiring, or any dus t accumulated at hi gh-temperature parts.
Accumulation of flammable materials around the battery, high-temperature part s of the engine, such as the engine muffler and turbocharger, and leakage of fuel and always carry out repairs or contact yo hydraulic oil will cause fire on the machin e. Check carefully, an d if any problem is found, ur Komatsu distributor. Not to get up or down at the rear of th e machine. It is dangerous because it is e asy to slip, and also this area cannot be seen from the operator's seat. Always use the handrails and steps and get on or off the machine at the fr ont. If the machine is at an angle, reposi tion it level before checking.
Perform the following inspections an d cleaning every day before starting engine for the day' 1. Check for damage, wear, play in work equipment, cylinders, linkage, and hoses. Check that there are no cracks, excessive wear, or play in the work e quipment, cylinder s, linkage, or hoses. If any problem is found, repair it. 2. Remove dirt and debris from aro und the engine, battery, and radiato r Check for dirt accumulated arou nd the engine or radiator. Also check for flammable mate rial (dry leaves, twigs, grass, etc.) accumulated aroun d the battery, engine muffler, turbocharger, or other high temperature engine aterials are found, remove them. parts. If any dirt or flammable m 3.
Check for coolant and oil leakag e around the engine Check for oil leakage from the en gine and coolant leaks from the cooling system. If any p roblem is found, repair it. 4. Check for leakage from fuel line Check that there is no leakage repairs. 5. Check for leakage of oil from the hydraulic equipment, final drive, hydraulic tank, hoses, Check that there is no leakage o f oil. If any problem is found, repair t he location of the o Check for oil leakage from the u ndercover and for any signs of oil leakage on the groun 6. Check for abnormalities in the u ndercarriage (track assembly, sprocket, idler, guard), w ear, loose bolts, or oil leakage from the rollers. Repair any problems. 7.
Check for abnormalities in the h andrails and steps, check for loose b Repair any problems and tighte 8. Check for broken gauges and la mps, and for loose bolts Check that there is no damage t o the panel, gauges, or lamps. If an part. Clean any dirt from the sur face.