Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD COOLANT WARNING 3 - 66 Always c heck the item s in this section befor e starting the en gine each Do not open the radiat or cap unless necessary. When checking t he coolant, always wait for the engine t o cool down and check the sub-tank. Immediately after the engine is stopped, the co olant is at a high temperature and the radiator is under high internal pressure. If the c ap is removed to check the coolant leve l in this condition , there is a hazard of burns. Wait for the temperature to go down, t hen turn the c ap slowly to release the p ressure and remo ve it c arefully. 1.

Open the inspecti on cover of the hydraul ic tank of the lef t side of the machine an d check the amount of c oolant in sub ta nk (1). 2. The c oolant level must be between the F ULL and LOW m arks. If the coolant level is low, add water throu gh the water fille r port of su b tank (1) un til the coolant reaches the FULL level. If the sub t ank is empty , it means that there i s leakage of co olant. Chec k for the loca tion and repair it imm ediately. If there is no problem, check th e level of the coolant in side the radiator tank. 3. After adding coola nt, tighten the cap sec