Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION OPERATION machine. 3 - 69 5. If the oil is above the H m ark, remove covers (2) and (3) u nder the front cover and prepar e a container to catch the draine d oil. 6. Loosen drain plug (P), dr plug (P). ain the excess oil, then tighten drain stall covers (2) and (3). ecurely, then close the engine side Check the oil level again. 7. If the oil level is correct, In 8. Tighten the oil filler cap s cover. REMARK If the machine is at an checking. angle, reposition it to level before If When checking the oil leve l after the engine has been operated, allow the engine to cool fo r 15 minutes before checking.

DRAIN WATER, SEDIMENT FROM FUEL TANK (ONLY POOR FUEL ARRANGEMENT SPECIFIC Prepare a container to catc 1. Open the fuel tank inspec tion cover (1) on the right side o f the 2. Set drain valve (2) to the OPEN position (O), then drai n the sediment and water accu the fuel. mulated at the bottom together with ul not to get fuel over yourself. out, turn drain valve (2) to the with When doing this, be caref 3. When clean fuel comes REMARK Before draining the water and sediment, pass a hose throug h the hole in the bottom plate of the tank.