. OPERATION OPERATION SEAT BELT WARNING 3 - 80 Always install a seat belt on machines equipped with ROP Before fitting the seat belt , check that there is no problem in the belt mount br acket or mounting belt. If it is worn or damaged, replace the seat belt. of damage, replace belts in accordance with the following schedule: eat belt manufacture, or every 3 years after the start of actual usage, whichever date comes first. during operations. is not twisted.
Even if there are no signs of damage, replace belts in accordan ce with the fol 5 years after the date of s eat belt manufacture, or every 3 years after the start of actual usage, w hichever date co mes fi Always wear the seat belt Fit the seat belt so that it REMARK The date of seat belt man ufacture attached to the seat belt is the start o f the 5-year perio d. It is not the start o f the 3-year period of actual us age. Check that the bolts of the mount installing the seat belt to th e machine a re not loose. If th ey are loose, tig hten t hem. The tightening torque for the mounting bolt is 24.5 ± 4.9 Nm (2.5 ± 0.5 k gm, 18.1 ± 3.6 l bft). the seat belt unit.
If the belt surface is scrat ched or frayed or if the fittings are broken or d eformed, replace the seat belt FASTENING AND REMOVIN G SEAT BELT ess the brake pedal fully, and adjust the seat so that your back is pressed against the at position, adjust tether belt (1). Tense tall it when there is no one sitting on the hold tongue (4) connected to wind-in ull out the belt slowly so that the belt will sufficiently. uckle (3) until it clicks. The belt is pulled echanism (2) until it is fitted to your locked under this condition and cannot e. Fit the belt to your abdomen without 1. Sit on the seat, depr backrest. 2. After adjusting the se the tether belt and ins seat. 3.
Sit on the seat and mechanism (2) and p cover your abdomen 4. Insert tongue (4) in b back into wind-in m abdomen. The belt is be extended anymor twisting it. tall it when there is no one sitting hold tongue (4) connected to ull out the belt slowly so that the b sufficiently. uckle (3) until it clicks. The belt is 4. Insert tongue (4) in b echanism (2) until it is fitted t locked under this condition and REMARK If the belt is locked before the tongue is inserted in the buckl e, let it return to the wind-in m echanism, then repe at the above procedure from th e start. 5. Pull the belt to check that it is securely locked in positio 6.
When removing the b elt, press the red button on buckl The belt will automati cally retract.