. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING 3. Insert the key in starting switch (2) and turn it to the START position. The engine will start. 3 - 84 Sit down in the ope rator's seat before starting the e Do not attempt to st art the engine by short-circuiting the engine s tarting circuit. Such an act m ay cause serious bodily injury or fire. Check that there are no persons or obstacles in the surrounding a rea, then sound the horn and start the engine. Exhaust gas is toxic . When starting the engine in co nfined spaces , be particularly careful to en NOTICE Do not crank the sta rting motor continuously for mor e than 20 seconds.
If the engine does n procedure in Step 3 Before starting, che ot start, wait for at least 2 minutes, then repeat the . ck that the fuel control dial is at the low idling (MIN) position. This machine is eq uipped with an automatic warmin g-up function and turbo protect functi on. In cold weather, even if the fuel control d ial is operated immediat ely after the engine is started, there may be no e speed. change in the engin If the fuel control di al is at the FULL position, the en gine may suddenly and cause damage to the engine components. speed position. Set the fuel control dial to a midpoint position or low speed positi 1.
Before starting, check that fuel control dial (1) is at the low idling position. 2. Set fuel control d ial (1) to a speed slightly high er than low i dling (MIN).