Komatsu — PARKING MACHINE

. OPERATION OPERATION PARKING MACHINE WARNING 3 - 108 When parking the machine, select flat hard ground. lope. Avoid parking the machine on a s On sl opes, even if steering, forwar d-reverse, gear shift lever i s set to the N position, the machine may mov e slowly down the slope. If it is unavoidably necessary to p ark the machine on a slope , place the parkin g brake lever at the LOCK position and insert blocks under the track shoes . As an additional safet y measure, lower the work equipment and th rust t he blade into the grou nd. er is touched by accident, the work If the work equipment control lev equipment may move suddenly, an d this may lead to a seriou s accident.

Befor e standing up from the ope rator's seat, always place the work equipment lock lever and parking brake lever securely at the LOCK position. LOCK positi 1. Sto p the machine. For detai ls, see "STOPPING MACHINE (PAGE 2. Set parking brake lever (1) to the LOCK position (L) and apply the 3. Set blade control lever (2) to t he LOWER (L) position and lower the blade to the ground. 4. Set work equipment lock lev er (3) in the LOCK position (L)