Komatsu — LOADING, UNLOADING WORK

. OPERATION TRANSPORTATION UNLOADING WORK referring to the section, "STARTING IN COLD 3 - 117 1. Load and unload on fir m level ground only. Maintain a safe distance from the edge 2. Apply the trailer brakes securely and put blocks (1) under the tires to hold the trailer i n position.Set gap (3) betwe en ramps (2) to match the distanc e between the left and right tr acks, and keep angle (4) to a ma If ramps (2) bend appre ciably under the weight of the machine, put wooden block (5) u nder the ramps to support th 3. Remove the chains an d wire ropes fastening the m achine. 4. Start the engine. In a cold weather, ca rry out an engine warming-up run 1)", in this manual.

nt lock lever to FREE position (F). In WEATHER (PAGE 3-9 5. Turn the work equipme nt lock lever to FREE positio 6. Raise the blade. 7. Set parking brake lever to the FREE position (F). to set the speed range to 1st or less, toward the ramps and drive slowly. 8. Use the variable mode 9. and travel slowly. Set the travel direction 10. The center of gravity of the machine shifts sudde nly at the border between the ra unbalanced and becom border slowly. Drive down the ramps mps and trailer, and the m achine is es dangerous. Accordingly, pass the slowly and carefully until the machine ctly. the 11. leaves the ramps perfe