Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION PROCEDURE FOR LIFTING OPERATIONS work equipment lock lever to the LOCK position (L) NOTICE 3 - 119 When liftin g the mach ine, stop it on a level place, then observ e the following procedu 1. secure 2. Stop t he engine a nd set the parking brake lever to the LOCK windows, cab doors, engine side cover, LOCK positio n (L). the glass 3. Lock cover, hydra secure ulic tank inspection cover, and fuel tank inspection cover ly. 4. Use a wire rope and sling that matches the weight of the ne. the machi Pass t he wire rope under the track fram e at the point where the machi ne is to be li fted. lifting position A):

Ma rk showing Use prot and to p ectors to prev revent the wir ent the wire rope from b e rope from cutting into eing cut on sharp corners the machine bodywork. When us ing a spread er bar, select an ample width to prevent contact with the machine. 5. Before the machi ne 100 - 200 mm (3.9 - 7.9 in) fro m the ground and check that th ere is no loo seness in the wire rop e and that the machine is kept horizontal. Then raise the mach