. OPERATION TROUBLESHOOTING PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING When connecting the cables, never contact the positive (+) and negative (-) terminals. When starting the engine with a booster cable, wear safety glasses and 3 - 127 STARTING ENGINE WITH BO When starting the engine with a booster cable, do as follows. rubb Be c each coul er gloves. areful not to let the normal m other. This prevents sparks fr d ignite the hydrogen gas giv achine and problem machine contact om generating near the battery which en off by the battery. Make sure that there is no mistak e in the booster cable connections.
The f inal connection is to the engi ne block of the problem machine , but spar ks will be generated when this is done, so connect to a place a s far as p ossible from the battery. Whe n disconnecting the booster c able, take care not to bring the clips in co ntact with each other or with the machine body. NOTICE The starting system on this machi ne is 24V. Always use a 24V machine for the n ormal machine al Alwa ys use a booster cable or clip of a thickness that is suitable f or th e capacit y of the battery. For t he battery on the normal mac hine, use a battery with the sam e capacit y as the problem mac Chec k that the cable and clips are not damaged or corroded.
Conn ect the clips securely. Chec k that the work equipment lo ck lever and parking brake lever of both m achines are at the LO Chec k that all levers are at the ne utral position. CONNECTING THE BOOSTER CA Keep t he starting switch of the n ormal machine and problem machine in t he OFF position Conne ct the booster cable as foll ows, in the order of the numbers marked in the diagram 1. Connect the clip of booster cable (A) to the positive (+) terminal of battery (C) on the problem machine. 2. Connect the clip at the other end of booster cable (A) to the positive (+) terminal of battery (D) on the normal machine. 3.
Connect the clip of booster cable (B) to the negative (-) terminal of battery (D) on the normal machine. 4. Connect the clip at the other end of booster cable (B) to engine block (E) on the problem machine. 1. Co nnect the clip of booster ca ble (A) to the positive (+) terminal battery (C) on the problem machine. end of booster cable (A) to the 2. Co nnect the clip at the other the sitive (+) terminal of batter y (D) on the normal machine . 3. Co nnect the clip of booster ca ble (B) to the negative (-) terminal battery (D) on the normal machine. 4. Co nnect the clip at the other e nd of booster cable (B) to engine ck (E) on the problem ma