Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINE OF SERVICE 4 - 6 FUEL To prevent the moisture in the air from condensing and forming water ins ide the fuel tank, alway s fill the fue l tank after completing the day's work. on instrument, and if fuel containing water or dirt is used, it cannot work properly. o let impurities get in when storing or adding fuel. hes the temperatures given in the Operation and Maintenance Manual.

The fuel pump is a precisi on instrument, and if fuel containing water or dirt is used, it cannot w ork properl Be extremely careful not t o let impurities get in when storing or adding f Always use fuel that matc hes the temperatures given in the Operation a nd Maintenance Manu If the fuel is used in te of lower than -15°C), th If the fuel is used in tem this may result in a dro mperatures lower than the specified temperat ure for use (particularly at temperatures e properties of the fuel will make it congeal. peratures higher than the specified temperatur e for use, the viscosity will go dow n, and p in output or other problems.

Before starting the engine , or when 10 minutes have passed after adding fuel, drain the sedimen t and wate r from the fuel tank. If the engine runs out of fu el, or if the filters have been replaced, it is ne cessary to bleed the ai r from the c ircuit. If there is any foreign mat erial in the fuel tank, wash the tank and fuel s ystem. NOTICE l. Always use diesel oil for the fue To ensure good fuel consumptio n characteristics and exhaust gas characteristics, t he engine mounted on thi s machine u ses an electronically controlled high-pr essure fuel injection device.

This device requires h igh precision parts and lu brication, so if low viscosity fuel with low lubricatin g ability is used, the durability may drop markedly. COOLANT AND WATER FOR DILUTION COOLANT (AF-NAC) has the important function of preventing corrosion as well as reezing is not an issue, the use of antifreeze COOLANT is essential. Komatsu genuine SUPER preventing freezing. Even in the areas where f Komatsu machines are su excellent anticorrosion, a hours. As a basic rule, we do not use another COOLANT, it the cooling system. reezing is not an issue, the use of antifreeze COOLANT is essential. pplied with Komatsu SUPERCOOLANT (AF-N AC).

SUPERCOOLAN T (AF-NA C) has ntifreeze and cooling properties and can be used continuously for two years or 4000 recommend the use of any COOLANT other th an SUPERCOOLANT (AF-NAC). If you may cause serious problems, such as corrosi on of the engine and a luminum p arts of ways observe the precautions given in the Operation and Maintenance Manual. ted with distilled water, so it is not flammable. COOLANT differs according to the ambient temperature. of the COOLANT, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-26)". When using antifreeze, al ways observe the precautions given in the Op eration and Maintenan ce Manual. COOLANT is already dilu ted with distilled water, so it is not flammable.

The density used for the COOLANT differs according to the ambient te For details of the density Even in the areas where it of over 30% in order to pr COOLANT is diluted with dilute the COOLANT with of the COOLANT, see "CLEAN INSIDE OF C is not considered necessary to prevent freezin g, always use COOLA NT with a d ensity event corrosion of the cooling system. distilled water that does not contain any ions or water-hardening substances. Never ordinary water. ait for the engine to cool before adding coolant.

If the engine overheats, w ait for the engine to cool before adding coolan If the coolant level is low, i t will cause overheating, and will also cause pro blems with corrosion d ue to air en tering the coolant.