Komatsu — HANDLING HYDRAULIC SYSTEM

. MAINTENANCE OUTLINE OF SERVICE (PAGE 4-75)".

4 - 9 HANDLING HYDRAULI The hydraulic equipment operations, it is also under high pressure, so when ca rrying out inspecti on or maintenance o f the hydra ulic related equipment, be careful of t he following when carrying out the operation Stop the machine on fl at ground, lower the work e quipment comple tely to the ground, a nd set so there is no pressure on the cylind Always stop the engin I mmediately after oper ations, the hydraulic oil an d lubricating oil ar e at high temperatur e and hig h pressure, so wait for the tempera ture of the oil at all parts to go down before starting maintenanc Even when the temper ature goes down, the syste m may be under in ternal pressure, so when loos ening plugs or screws or when loo parts nternal pressure befor When carrying out ins hydraulic tank to remo Inspection and maintenan and replacement of hydra If hi gh-pressurehoses hav e been removed, check tha t there is no dama ge to the O-rings .

If any dama ge is found, replace the O-ring. It is necessary to bleed th e air from the circuits when the hydraulic filte r element or straine r have bee n replaced or washed, or when hydra ulic equipment has been r epaired or replace d, or when the hydraulic pipin g has been removed. The accumulator is char The incorrectly. For details of the method of handling, s CONTROL CIRCUIT)