Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE WHEN LOOSENING TENSION WARNING the procedure given below. If the track tension is not 4 - 30 WHEN INCREASING TENS Prepare a grease pum 1. Pump i n grease thr ough grease fi tting ( 2) with a gr ease pump. 2. To che ck that the c orrect tension has be en achieve d, move the machin e backward s and forward 3. Check the track ten sion again, an d if the tension is not correct, adjust i 4. It is po ssible to pu mp in grease u ntil di mension S reaches 20 mm (0. wear o 8 in), but if f the pin a the tension nd pushing is , s still w o it is eak, there i necessary s extensive to turn or replace distribu the pin a tor to repair nd bushing. Please ask your Komatsu .

It is extreme he grease relieved by t his procedure , please contac t your Komatsu dis tributor. 1. Loosen plug (1) gr adually to release th e grease. e turn. 2. When l oosening pl ug (1), turn it a maximum of on e turn. 3. If the g rease does not come out smoot hly, move t he machine forward s and back wards a short distan 4. Tighten plug (1). 5. To che ck that the c orrect tension has be en achieve d, move the machin e backward s and forward s. 6. Check the track ten sion again, an d if the tension is not correct, adjust i t again.