Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CLEANING WITH COMPRESSED AIR WARNING REMARK Check the rubber hoses, and if there are any cracks or the hose has become weak, replace it. Check also that there are no loose hose clamps. 4 - 35 high-pressure protective equ Before startin g the cleaning op eration, alway s stop the engin e and stop the rotation of the fan. If y ou touch the fan when it is rotating, it ma y cause serious p ersonal injur For details of opening or closin g the rear ma sk, see "OPENIN G OR CLOSING REAR MASK (PAGE If there is seve re clogging of th e radiator fi ns with dust, u 1. Remove 4 bolts (1) at the bottom of th 2. Pull rear m ask (2) towards you and pu sh it up.

Check that position an the rear mask h as opened t o the maximum opening d that the lock i s applied, th en release it. 3. Clean the r adiator fins clogged with mu d, dust and lea ves with compresse compresse d air. Steam or water may be used instead of d air. 4. Close rear mask (2). When closi (3) in the di the rear ma ng the rear mas k, lift it up, s crew lock relea se knob rection of the a rrow to rele ase the lock, th en close sk. olts (1) at the bottom of the rear mask. 5. Tighten 4 b olts (1) at the b ottom of the