. MAINTENANCE SERVICE PROCEDURE EVERY 250 HOURS SERVICE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 50 Maintenanc e for every 50 hour s service sh ould be car ried ou t at the same t The oil is at high temperature im mediately aft er the machi ne has been operated. Wait for the oil to co ol down before s tarting the operat If there is still pressure remainin g inside the case, the oil o r plug may Loosen th e plug slowly to releas e the pressu 1. Se mark perpendicular to th e ground surface. 2. Using th e handle, r emove p lug (F). If th e oil is up to the bottom of the p lug hole, th e level is correct. 3. If t he oi l level is low , add oil through th e hole of plu g (F).
Add oil until oil overflow s from th e hole of pl 4. After ch ecking, inst all plug Tightening torque: 68.6 ± 9 .8 Nm (7 ± 1 ± 7.2 lbft)