Komatsu — COVER, CAP WITH LOCK

. OPERATION EXPLANATION OF COMPONENTS Insert the key as far as it will go, then turn it. If the key is turned (L) : Lock position (F) : Open position ° (B) : 45 ° 3 - 47 COVER, CAP WITH LOCK Use the sta locks. unlock (A separate key is used f or locki ng the fuel ta nk cap For details of the location s of th e cover s and caps w ith lock s, see "LOCKING (PAGE 3-109 )". before it is i nserted fully, i t may break. METHOD OF OPENING OR CLOSING HYDRAULIC TANK CAP The method of opening o r closin g hydraulic c ap is a s follow s. OPENING T 1. Insert th e key. Make sure th at you have i nserte d the k ey fully re turning it. turned artially , it may break rking angle of key 18 2.

Turn the key counterclockwi se to a lign th e matc h mark (2) on the cap a click i opened with the rotor groov e, then turn th e cap slowly. When s heard, the lock is released, enabling the cap to be . released, LOCKING T HE CAP cap into place. 1. Turn the cap into plac 2. Turn the key clockwis e and take th e key