Komatsu — STARTING ENGINE

MACHINE OPERATIONS AND CONTROLS OPERATION STARTING ENGINE IN COLD WEATHER WARNING Start the engine only after sitting down in the opera- tor's seat. Do not attempt to start the engine by short-circuiting the engine starting circuit. Such an act may cause a serious bodily injury or fire. Check that there are no persons or obstacles in the surrounding area, then sound the horn and start the engine. Never sue starting aid fluids as they may cause explo- sions. Exhaust gas is toxic. When starting the engine in con- fined spaces, be particularly careful to ensure good ventilation. NOTICE Do not keep the starting motor rotating continuously for more than 20 seconds.

If the engine fails to start, wait for about 2 minutes and repeat from Step 2. When starting in low temperatures, do as follows. 1. Turn fuel control dial (1) to the center position between LOW IDLING and HIGH IDLING. 2. Hold the key in starting switch (2) at the HEAT position, and check that preheating monitor (3) lights up. After about 30 seconds, preheating monitor lamp (3) will flash to indicate that preheating is finished. REMARK The monitor and gauge also light up when the key is at the HEAT position, but this does not indicate any abnormality. 3-58