Komatsu — MACHINE OPERATION

OPERATION MACHINE OPERATIONS AND CONTROLS MOVING MACHINE BACKWARD 1. Set lock lever (2) in the FREE position, fold the work equipment, and raise it 40 to 50 cm (16 to 20 in) from the ground. 2. Pull blade control lever to raise the blade. 3. Operate right and left travel levers (3) as follows. When the sprocket is at the rear of the machine Pull levers (3) backward slowly to move the machine off. When the sprocket is at the front of the machine Push levers (3) forward slowly to move the machine off. 4. When booster pedal (4) is depressed, the speed will increase. For details of the speed, see SPECIFICATIONS (PAGE 5-2). 5.

For machines equipped with a travel alarm, check that the alarm sounds. If the alarm does not sound, please contact your Komatsu distributor for repairs. 3-67