Komatsu — LOADING AND UNLOADING WITH TRAILER

TRANSPORTATION OPERATION LOADING 1. Perform loading and unloading on firm, level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks under the tires to ensure that the trailer does not move. Then fix the ramps in line with the centers of the trailer and the machine. Be sure that the two sides are at the same level as one another. Make the slope of the ramps a maximum of 15є. Set the distance between the ramps to match the center of the tracks. 3. Set the travel speed selector switch to the LOW position. 4. Lower the engine speed to low idling fuel control dial. 5.

If the machine is equipped with work equipment, set the work equipment at the front, and travel forward to load it; if it has no work equipment, travel in reverse to load it. 3-108