OPERATION TROUBLESHOOTING LIGHTWEIGHT TOWING HOOK WARNING The shackle must always be used. Hold the wire rope level and direct it straight to the track frame. Move the machine slowly and be careful not to apply any sudden load to the wire rope. There is a hole in the track frame to fit the shackle when towing light objects. Permissible towing load: Max. 73,600 N (7,500 kgf) PRECAUTIONS ON PARTICULAR JOBSITES WARNING Never carry out any operation where the sensor goes under water. If the sensor should go under water, check the actuation of the automatic stop. If there is any abnormality, please contact your Komatsu distributor for repairs.
When carrying out digging operations in water, if the work equipment mounting pin goes into the water, carry out greasing every time the operation is carried out. For heavy-duty operations and deep digging, carry out greasing of the work equipment mounting pins every time before operation. After greasing, operate the boom, arm, bucket, and blade several times, then grease again. 3-125