Komatsu — OTHER TROUBLE

OPERATION TROUBLESHOOTING 4-SYSTEM RELATED PARTS If any error code is displayed on the depth display portion of the monitor panel, follow the procedure given in the table below for the action to take after self diagnosis. ACTION TO TAKE AFTER SELF DIAGNOSIS 3-135 Error code Machine condition Probable cause Action Sensor error system 31 Impossible to operate in direction of interference (boom RAISE, arm IN, offset left) Defective boom potentiometer Use the cancel switch to move the machine to a safe place, then have the machine checked immediately.

32 Defective arm potentiometer 34 Defective offset potentiometer 41 Engine stops at low idling, work equipment, travel lack power Defective engine speed sensor Operations can still be carried out, but have the machine checked immediately. ON/OFF sole- noid error sys- tem 51 Impossible to carry out any opera- tion of work equipment, impossible to operate swing Defective basic pressure lock sole- noid Use the cancel switch to move the machine to a safe place, then have the machine checked immediately. Depending on location of failure, it may be impossible to carry out oper- ations even when the cancel switch is turned ON, so in such cases, have the machine checked immediately.

52 Impossible to operate in direction of interference Defective left offset lock solenoid 54 Impossible to operate swing (swing holding brake remains ON) Defective swing holding brake lock solenoid Have the machine checked immedi- ately 62 Impossible to operate offset to right Defective right offset lock solenoid Operations can still be carried out, but have the machine checked immediately.

64 Pressure does not rise when travel lever is operated, travel lacks power Defective 2-stage relief solenoid EPC solenoid error system 71 Impossible to operate in direction of interference Defective boom RAISE EPC sole- noid Use the cancel switch to move the machine to a safe place, then have the machine checked immediately. Depending on location of failure, it may be impossible to carry out oper- ations even when the cancel switch is turned ON, so in such cases, have the machine checked immediately. 72 Impossible to operate boom LOWER Defective boom LOWER EPC sole- noid 74 Engine stops Defective PC EPC solenoid Have the machine checked immedi- ately.

81 Impossible to operate in direction of interference Defective arm EPC solenoid Use the cancel switch to move the machine to a safe place, then have the machine checked immediately. Depending on location of failure, it may be impossible to carry out oper- ations even when the cancel switch is turned ON, so in such cases, have the machine checked immediately. 91 Impossible to carry out any work equipment operation or swing oper- ation Abnormality in automatic stop posi- tion If the cancel switch is used to move bucket to the front or to the right, the self-diagnosis is canceled and it becomes possible to operate the machine again, but have the machine checked immediately.

No error code is displayed, but it is impossible to carry out any work equipment operation or swing operation Have the machine checked immedi- ately.