MAINTENANCE OUTLINE OF SERVICE ELECTRIC SYSTEM MAINTENANCE It is extremely dangerous if the electrical equipment becomes wet or the covering of the wiring is damaged. This will cause an electrical short circuit and may lead to malfunction of the machine. Do not wash the inside of the operator's cab with water. When washing the machine, be careful not to let water get into the electrical components. Service relating to the electric system is checking fan belt tension, checking damage or wear to the fan belt and checking battery fluid level. Never install any electric components other than there specified by Komatsu.
External electro-magnetic interference may cause malfunction of the control system controller, so before installing a radio receiver or other wireless equipment, contact your Komatsu distributor. When working at the seashore, carefully clean the electric system to prevent corrosion. When installing electrical equipment, connect it to the special power source connector. Do not connect the optional power source to the fuse, starting switch, or battery relay. 4-9