Komatsu — SAFETY CRITICAL PARTS

MAINTENANCE PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS To ensure safety at all times when operating or driving the machine, the user of the machine must always carry out periodic maintenance. In addition, to further improve safety, the user should also carry out periodic replacement of the parts given in the table. These parts are particularly closely connected to safety and fire prevention. With these parts, the material changes as time passed, or they easily wear or deteriorate.

However, it is difficult to judge the condition of the parts simply by periodic maintenance, so they should always be replaced after a fixed time has passed, regardless of their condition. This is necessary to ensure that they always maintain their function completely. However, if these parts show any abnormality before the replacement interval has passed, they should be repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same as the hoses. When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time. Ask your Komatsu distributor to replace the safety critical parts.

SAFETY CRITICAL PARTS 4-15 No.

Safety critical parts for periodic replacement Q’ty Replacement interval 1 Fuel hose (Fuel tank - Fuel injection pump) 2 Every 2 years or 4000 hours, whichever comes sooner 2 Spill hose (Nozzle - Fuel tank) 1 3 Turbocharger lubricating oil hose 1 4 Engine oil filter hose (Engine - Oil filter) 2 5 Pump outlet hose (Pump - Control valve) 1 6 Work equipment hose (Boom cylinder inlet) 4 7 Work equipment hose (Bucket cylinder line - Boom foot section) 2 8 Work equipment hose (Bucket cylinder inlet) 2 9 Work equipment hose (Arm cylinder line - Boom foot section) 2 10 Work equipment hose (Arm cylinder inlet) 2 11 Work equipment hose (Offset cylinder line - Boom foot section) 2 12 Work equipment hose (Offset cylinder inlet) 2 13 Swing line hose (Swing motor inlet) 2 14 Main suction hose 1 15 Heater hose 2 16 Seat belt 1 Every 3 years