Komatsu — CHANGE OIL IN HYDRAULIC TANK

MAINTENANCE PROCEDURE MAINTENANCE 5. Set the oil container under the drain plug under the machine. Using the handle, remove drain plug (P) and drain the oil. Check the O-ring installed to plug (P), and if it is dam- aged, replace the O-ring. After draining the oil, tighten drain plug (P). Tightening torque: 69 ± 10 N•m (7 ± 1 kgf•m, 51 ± 7 lbft). When removing drain plug (P), be careful not to get oil on your- self. 6. Add the specified amount of engine oil through oil filler port (F). Check that the oil level is between H and L on the sight gauge. For details of the method of bleeding the air, see "CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL (PAGE 3- 49)". 4-68