Komatsu — PRECAUTIONS RELATED TO SAFETY

GENERAL PRECAUTIONS ATTACHMENTS AND OPTIONS GENERAL PRECAUTIONS PRECAUTIONS RELATED TO SAFETY If attachments or options other than those authorized by Komatsu are installed, this will not only affect the life of the machine, but will also cause problems with safety. When installing attachments not listed in this Operation and Maintenance Manual, contact your Komatsu distribu- tor first. If you do not contact Komatsu, we cannot accept any responsibility for any accidents or failures. WARNING General precautions Attachments are powerful tools. To prevent serious injury or damage, use the attachment correctly.

Read the instruction manual for the attachment thoroughly, and do not use this attachment unless you are sure that you have understood the guides completely. If you lose the instruction manual, always ask the manufacturer or attachment sales company for a new copy. Depending on the attachment, install the necessary front guard to the machine. Depending on the attachment, the impact noise may make it difficult for fellow workers to transmit instructions for the operation. Before starting operation, decide a leader and determine the signals to be used. Do not carry out swinging operations to the side with a heavy load on the attachment. This is particu- larly dangerous on slopes.

Compared with a machine equipped with a bucket, a machine equipped with a breaker has a heavy load at the front of the work equipment and is unstable. To avoid the danger of tipping over, do not carry out operations with the attachment swung to the side. When an attachment is installed, the swing range and center of gravity of the machine are different, and the machine may move in an unexpected way. Be sure that you understand the condition of the machine properly. Before starting operations, set up a fence around the machine to prevent people from entering. Never operate the machine when there are people near the machine.

To prevent serious accidents caused by misoperation, do not put your foot on the pedal except when operating the pedal. 6-2