ATTACHMENTS AND OPTIONS ATTACHMENT INSTALLATION COMBINATION TABLE ATTACHMENT INSTALLATION COMBINATION TABLE ATTACHMENT COMBINATIONS This table lists the combination of attachments which can be installed to the standard arm, short arm and long arm. NOTICE When the long armis equipped, if the bucket is pulled in to the machine body, the arminterferes with the body. Operate the long arm carefully. When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. Categories of use For general digging: Digging or loading sand, gravel, clay etc. For light duty digging: Digging or loading dry, uncaked earth and sand, mud etc.
For loading work:
Loading dry, loose earth and sand 6-9 Name Tooth mounting pin Capacity (m3) SAE/CECE Outside width (bucket body) (mm) Outside width (side cutter) (mm) Use Narrow bucket Vertical 0.18/0.16 450 (18") 570 (22") Narrow digging Narrow bucket Vertical Horizontal 0.28/0.26 600 (24") 720 (28") Narrow digging Narrow bucket Vertical Horizontal 0.36/0.33 700 (28") 820 (32") Narrow digging Standard bucket Vertical Horizontal 0.44/0.40 833 (33") 953 (38") General digging Strengthened bucket Vertical Horizontal 0.44/0.40 833 (33") 953 (38") Heavy duty digging Strengthened bucket Vertical Horizontal 0.50/0.45 859 (34") 979 (39") Heavy duty digging Light duty bucket Vertical Horizontal 0.50/0.45 859 (34") 979 (39") General digging