Operation 3.3. Operation 3.3.2. Starting the engine Make sure that there are no persons or obstacles in the direct vicinity of the machine, then sound the horn and start the engine. OFF ON NOTE Do not operate the starter for more than 20 seconds. If the engine does not start, wait for at least 2 minutes before try- ing to start the engine again. START GK100270 1. Turn the key in the starter switch to ON. Preheating will start automatically and the preheating control lamp (2) will light up. 2 The preaheating time required before start-up may vary, depending on the water temperature of the engine. SPEED CHECK CAUTION PARKING BRAKE GK100673 2. Lightly depress the accelerator pedal (3).
3 AE061760 3. Check that the preheating control lamp (2) is out, then turn the starter key to the START position to start the engine. OFF ON START GK100271 4. When the engine is started, release the key; it will automati- cally return to ON. 3-53 CAUTION CAUTION