Komatsu — Digging

Operation 3.3. Operation 3.3.10. Wheel loader operations In addition to the following, it is possible to further increase the range of applications by using various attachments. Digging Always set the machine facing straight to the front when car- rying out digging or scooping operations. Never perform these operations with the machine articulated. NOTE Slipping of the tires slip in operation reduces the tire life! When loading piled soil or blasted rock, drive the machine forward and observe the following points to prevent cutting of the tires caused by slipping: Always keep the site flat, and remove any fallen rocks.

When working with stockpiles, operate the machine in 1st or 2nd gear; when loading blasted rock, operate the machine in 1st gear. 1. When driving the machine forward and lowering the bucket, stop the bucket about 30 cm (11.8 in) above the ground, then lower it slowly. NOTE 30 cm If the bucket hits the ground, the front tyres will come off the ground, and the tires will slip. GK100297 2. Shift down immediately in front of the material to be loaded. Then completing the shift down, depress the accelerator pedal and dig the bucket into the load. GK100295 3-65 CAUTION CAUTION