Komatsu — Removing the attachment

Operation 3.4. Transport 3.4.4. Removing / Fitting attachment Stop machine on level ground. Apply parking brake. Lower bucket to ground level. Switch off engine. Use wedges to secure machine against rolling away. Secure articulated joint with the locking bar. Remove / Fit the attachment if this is necessary for carrying out or simplifying the transpor- tation of the machine or if the attachment has got to be exchanged. In this case, proceed as follows: Removing the attachment 1. Undo the fastening screw (1) for the retaining bolt (4) of the tilt arm (2) and remove. 2 4 The tilt arm (2) is the connecting piece between the tilt lever (3) and the attachment (8). 1 3-83 CAUTION 2 8