Komatsu — 4.6.2. Chassis

Troubleshooting 4.6. Other troubles 4.6.2. Chassis If faults or causes of faults are not listed below, have them recti- fied by local dealer. TRANSMISSION *) Have this work performed by local dealer. AXLES *) Have this work performed by local dealer. 4-15 Fault Fault cause Remedy Machine does not drive. Parking brake on Release parking brake. Drive direction lever not engaged correctly Engage drive direction lever cor- rectly. Oil level too low Top up with oil according to specifi- cations. Machine only runs slowly and not at full power. Oil level too low Top up with oil according to specifi- cations. Screen is clogged Disassemble, clean Overheating.

Oil level too low or too high "Top up with oil according to speci- fications. Machine being driven in a gear which is too high Run machine in a lower gear. Torque converter stopped for too long Reduce down time Engine overheating See "ENGINE; fault: Temperature gauge in red zone and respective control lamp flashing." Noises. Oil level too low Top up with oil according to specifi- cations. Fault Fault cause Remedy Noises. Oil level too low Top up with oil according to specifi- cations. Incorrect oil for machine with multi- disc self-locking differential Top up with specified oil.