7.1. ECSS-electronics Special equipment and attachments 7.1.4. Precautions when handling the accumulator Danger of injury! Pressure accumulators are filled with highly pressurised nitrogen. Do not open or damage pressure accumulators. Immediately inform your Komatsu dealer, if you detect mal- functions or defects of pressure accumulators. Filling pressure accumulators with gas or topping up gas in pressure accumulators is strictly limited to persons authorised to handle highly pressurised gas. Do not hit against the pressure accumulator. Keep naked light and sources of heat away from pressure accumulators. Do not drill holes into the pressure accumulator.
Do not weld parts to the pressure accumulator. The service technicians must depressurise the hydraulic sys- tem before they can remove the pressure accumulators. The service technician must let the gas escape before they can disassemble the pressure accumulator. 7-4 WARNING WARNING